● Whiteboard Type:Interactive Whiteboard
● Place of Origin:Guangzhou, China (Mainland)
● Style:Finger touch and Portable
● Technology:Laser Image Calibration Technology
● Active Size:40-100"
● Delay:less than 30ms
● Certificate:CE, FCC, ISO 9001
● Responsible speed:120fps
● Multi touch:support 10 points touch
● Auto calibration::Support
● Gesture recognition:Support
● Warranty:1 years
Carton inside and wooden case outside
7 working days after order confirm
Board with two parts: emitter and sensor. Emitter can be attached on flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the sensor. Computer will figure out the position of the mouse by accurate calculating the reflected light position.
Use the advanced algorithm to avoid the affect of the light.
No need traditional electronic board
The only requirement for the board or wall is flat and evenness. The board can be with the frame. The projection screen can closer to the frame, even in the edges of the frame, FP3 product can work well.
No need IR pen to write, finger or any non transparent object could write directly.
Support plenty of gesture recognition
write with single finger; move with two fingers; eraser with palm; two fingers for zoom in& zoom out; two fingers work as scroll bar and so on.
5s auto calibration
Unlike other Infrared technology and Optical technology which only support manual calibration. We support auto calibration is much more accuracy and easier to operate.
Support 10 points finger touch (10 people can write together)
Support Larger active size
support 40-100” for the room with sunlight (if the room without sunlight, it can support the active size of 40-120”
Portable, high integration and easy to install
Total weight is only around 500g. The installation is very easy, just needed to put the emitter part on the upper of projection Screen, and the sensor mounted to projector or ceiling. No skill needed.
Sensor with the flash chips
don’t need to calibration if you change the computer with the same resolution ratio. It save time, and make the use easier.
Wireless connection between emitter and sensor, and sensor wireless control the emitter’s on and off. This make product more durable.
Sensor’s filter with auto push-pull device
When do auto calibration, the filter will be open; after calibration, the filter will be closed automatically. Such action makes the product more stable to defense the interference light, and the auto calibration success easier.
Turn common board or wall to touch board
It can turn any flat surface (whiteboard, wall and so on) into finger touchable.
The innovative teaching software tool provides you a powerful unique interface that provides all the tools that you need most
You could open word, ppt and other profile, screen shoot, print, insert hyperlink, record the lesson etc. More easier and convenience than office operation system.
Dry erase flat surface
Support to present multimedia, operate software and access website content directly from any flat surface.
we could offer your logo on the package and software.
Finger Touch Portable Interactive Whiteboard -- FP3 Board
Automatic(5s) / Manual (25/36 points)/Semi Automatic (4 points)
Single finger is for "Write", Two fingers for "move","zoom in or out" and "scroll bar", Palm for "Erase",Palm stay 2s for Spot, Palm two clicks for back to desktop.
Ten points touch, write and eraser can do together.
Software auto-control, enhance stability.
Minimum Active Size
Max Active Size
120inch( no sunshine room);100inch( sunshine room)
Laser Image Calibration Technology
1 Pixel (Resolution: 4096*4096)
Short throw/ Long throw: 3units; Ultra short throw: 4units.
Wave of the laser
The sensor and computer are connected by USB Cable; Emitter an Sensor are wireless; Emitter just need power.
Windows XP, Vista, Windows 7, Windows 8
Calibration software(driver) and GLboard(education software)
CE, FCC, ISO9001
1. Sensor 2.Emitter 3.Mounts 4.USB cable (12m) 5.Pointer 6.Power Adaptor 7. Manual